CloseClose
| Embedded control board | ✔ Nice RUA1 |
|---|---|
| Maximal weight of gate leaf | 1800 kg |
| Power supply | 230V |
| Power supply - engine | 230V |
| Synchronous operating with second motor | ✔ |
| Protection rating | IP44 |
| Operating temperature | -20°C ÷ +60°C |
| Dimensions | 400 × 390 × 255 mm |
| Integrated radio receiver | ✘ |
|---|---|
| Input for radio receiver | - Nice radio receivers with SM connector (OXI, SMXI, SMXIS, OXIT) - Universal third-party radio receivers |
| Radio AERIAL Input | ✔ 52Ω for RG58 or similar type of cable |
| Programmable functions | - Automatic closing - Closing after photocells - Always close - Deceleration - Peak force / Gradual acceleration - Pre-flashing - warning before closing - CLOSE becomes PARTIAL OPEN - SLAVE mode |
| Self-Recognition functions | Self-recognition of the type of ‘STOP’ device (Normally Open, Normally Closed contact or 8.2KΩ). Self-recognition of the gate length and calculation of the deceleration points and the partial opening point. |
| Flashing light output | ✔ For 2 BLUEBUS flashing lights: - Nice ELB - Nice LUCYB - Nice WLT - Nice MLBT |
| OPEN input | For normally open contacts (the closing of the contact causes the ‘OPEN’ command) |
| CLOSE input | For normally open contacts (the closing of the contact causes the ‘CLOSE’ command) |
| Open Gate Indicator Output | ✔ For one lamp 24V maximum 4W (the output voltage may vary between –30 and +50% and can also control small relays. |
| BLUEBUS Output | One output, maximum 15 BLUEBUS units |
| STOP input | For normally open contacts, for 8.2KΩ; constant resistance, or normally closed contacts; with self-recognition (any variation from the memorized status causes the ‘STOP’ command) |
| Step-by-step Input | For normally open contacts (the closing of the contact causes the STEP-BY-STEP command) |
| Emergency power supply | ✘ |
| Solar power supply | ✘ |
